Overview

Low Profile, 6 Point Wrench with Offset 3/8" Square Drive for Clearance in Hard-to-Reach Spaces.

Use on oil and fuel filter canisters when replacing the element. Size is laser marked on each wrench with a blow-molded case for storage.

If using a torque wrench with these adapters, adjust the torque setting to compensate for any change in length between the center line of the fastener and the center line of the torque wrench drive. The torque setting will be the same if you put the offset wrench at 90 degrees to the handle of the torque wrench.

Part #

Description

40610

24mm for Cadillac and some BMW

40620

25mm for Fleetguard Filter on Motorhomes, Buses, and Some Medium Size Trucks with Cummins Engine. Also Some K&N Filters

40630

27mm for 2003 and later Mercedes 1.8L, Smart and some VW

40640

28mm for 2010-2018, 6.7L Dodge Cummins Fuel Filter Canister

40650

29mm (1-1/8") for Dodge Cummins Fuel Filter Housing

40660

32mm (1-1/4") for GM Ecotec, 2.0L, 2.2L and 2.4L Four Cylinder Oil Filter Housing; Some Saturn & Saab

40670

36mm for Ford 6.0L Diesel Fuel and Oil Filter Housings, Mini Cooper and some BMW Oil Filter Housings, and Mack Truck Oil Filter Housing

40680

Case for 40600

WARNING: Cancer & Reproductive harm www.P65Warnings.ca.gov